Aluminium Track Recommended

Automatic Sliding Aluminum Doors or Aluminium Track ?

Aluminum Sliding doors are stackable doors of many panels that move entirely to one side stacked neatly together. Their earliest form can be seen in traditional Japanese architecture. Now they are a definite feature of most public spaces like malls, hospitals etc. They are manufactured with a sophisticated track and frame system with a superior sliding mechanism. They offer an energetic look to any property and helps to maximize the light in the room and achieving the full potential of the view. They are a feasible alternative to bi-folding doors, Aluminium Track  in Tip  with a sash width going up to 120 cms.

Aluminum Framing System

What are the advantages of automatic aluminum sliding frame doors

· Disabled friendly – These automatic doors open and close on their own.

· Safety features – they have up to date safety features and wireless remote control as well. Timers allow security personnel to lock the doors without having to be present near them.

Aluminium Doors Cape Town

· Gives Footfall account – the number of times the door opens can be obtained. This is useful footfall information in malls or shops.

· Style and variety. These doors are available in aluminum, which can be painted to depict the company’s logo etc. in an office. The latest frameless glass doors are very popular among offices, where they allow an uninterrupted view of the proceedings outside.

Aluminium Profile

· They allow for heat or coolness retention since they open only when somebody approaches the door

What are the parts of an automatic aluminum sliding door

An automatic sliding door normally consists of the following parts

· Operator

· Header

· Track

· Carrier wheels

· Sliding door panel(s)

· Sidelite panel(s)

· Jambs

· Lock and activation/ safety setup

The door panels are made from extruded aluminum profiles and safety glass for visibility.

Aluminium Doors Durban

Applications of automatic sliding aluminum doors

· Higher the traffic through the doors, heavier will be the moving panel.

Good for offices, hospitals, malls, banks, restaurants, art galleries etc.

· Fire and smoke door applications

· Energy conservation

· Security control, directional control or card access control applications

How To Make Aluminium Windows

Testing procedures – The doors are made to open and close automatically for forty eight hours at a stretch.

How are they assembled?

· When they are shipped, the instructions for installation accompany them.

· The instructions are to be read fully

· Two or more people are required to install it

· Be careful when handling the glass

· Operate power tools carefully according to manufacturer’s instructions

Aluminium Doors Cape Town

What is weatherstripping?

Weatherstripping is sealing the sliding panels from the elements of the weather by an insulation strip. This has to be replaced when it gets worn out.

What are the things to watch out for in automatic sliding doors

· Installation is not easy – the tracks have to be perfectly aligned, and more than one person is required to install a sliding door.

· The track attracts dirt because it is a series of grooves in which dirt accumulates very fast

Aluminium Door Frame

· The doors get jammed sometimes because of the rust and dirt of the metal parts. They have to be changed in this case. Regular oiling helps too.

· If there is a power cut, they will get jammed and they have to be forced open.

Interesting Facts About Aluminium Track in Johannesburg:

 About Aluminium Track in Johannesburg:

Aluminium Sliding Doors Price List If you have a wonderful house with a great view of your garden or picture-postcard scenery spread gorgeously in front then you need doors that give an unimpeded view.
Consider the standard options like sliding doors. A part of the opening will always remain covered regardless of whether you use two partitions or three partitions. French doors simply do not suit large openings. The answer is custom bifold doors especially when the opening is large and an unrestricted view is desired. They save space and give an unhindered view of the exteriors.
The term bifold doors may be a misnomer since these doors are, in effect, made up of several panels that fold together like an accordion or concertina into a compact bunch of panels that do not take up much space and stay neatly on one side of the opening. You have a clear view. Standard panel sizes may range from 24 to 36 inches in width or customized to suit the width of the openings, which could be a better option in some cases. Custom bifold doors can help save space and the use of matching hardware means it will be a joy to operate.
Customization could take several forms. You can choose to have bifold doors with narrow or broader panels to suit design considerations and aesthetics of how the door will look when fully closed. Narrow panels do give a nice look but in some cases one may wish for a less obstructed view in which case broader panels serve the purpose. Cost will also vary. Obviously more panels lead to higher cost but the advantage is that opening and closing the bifolds will be easier when the door has narrow panels and they take up less space.
Where there are doors with glass the question of curtains or blinds always comes up. Here again customization helps when you choose double glazing panels with inbuilt blinds that are totally sealed within and can be opened or closed by sliding a magnetic latch. Such integrated bifold doors also help save space and present a neater appearance. Then there are small details that the installer and manufacturer will take care of such as using quality sliding tracks, pivots and hinges that integrate seamlessly into the aluminum frame. Another matter that necessitates customization is whether to place the track at the top or bottom. It is best to consult a reputed door supplier and installer and get a site inspection in order to get a customized fitting.
Bifold doors are not meant just as a partition between indoors and outdoors. They can also be used indoors to good effect as space savers between rooms. One can have a larger opening without the inconvenience of large door panels creating obstructions in confined spaces.
Bifold doors have several advantages such as ease of use, complete opening up of a room to the outside, security with the right set of hardware and energy efficiency. These advantages can be further enhanced by customizing the bifold panels along with glazing and hardware fittings.

Aluminium Track in Johannesburg

Aluminium Profile

Extrusion is the process to change the structure and shape of different metals. Some of the metals that are commonly extruded include aluminium, copper, lead, magnesium, zinc, titanium etc.

As aluminium is malleable in nature, it is easy to extrude. Specific dies are used for the aluminium extrusion process. These steel dies have opening of the desired shapes. Primarily, this process can be of two types - hot and cold. For hot process, precise heating is very important. It is done above the aluminium's recrystallization temperature. While, cold process is done at room temperature or near room temperature.

To obtain superior quality and improved surface finished aluminium extrusions, accurate temperate and its monitoring is vital. The finishing increases the durability, strength and its appearance. In the process, a billet is heated at the temperature of 400 C to 500 C and is pushed through the die under pressure to create preferred profiles. The shape, structure and specifications vary according to the requirements of the product, customers and its application.

The company's manufacturing aluminium extrusions prefer extrusion process over welding as it gives product with constant cross section. The strength and lightweight (strength-to-weight ratio) of this metal makes it popular among customers. Its several other properties gives it edge over other metals. These are cost-effective, corrosion-resistive, flexible and durable.

The prime source of aluminium is bauxite ore and Feldspar to some extent. Some of the fields where the this metal's extruded shapes are used include transportation, building and construction to name a few.

Why And Why Not Opt For An Aluminum Sliding Door

How To Make Aluminium Windows And Doors

High strength aluminium alloys.

The origin of aluminium alloys in aircraft construction started with the first practical all-metal aircraft in 1915 made by Junkers in Germany, of materials said to be `iron and steel'. Steel presented the advantages of a high modulus of elasticity, high proof stress and high tensile strength. Unfortunately these were accompanied by a high specific gravity, almost three times that of the aluminium alloys and about ten times that of plywood. Aircraft designers during the 1930s were therefore forced to use steel in its thinnest forms. To ensure stability against buckling of the thin plate, intricate shapes for spar sections were devised.

In 1909 Alfred Wilm, in Germany, accidentally discovered that an aluminium alloy containing 3.5 per cent copper, 0.5 per cent magnesium and silicon and iron, as unintended impurities, spontaneously hardened after quenching from about 480°C. The patent rights of this material were acquired by Durener Metallwerke who marketed the alloy under the name Duralumin. For half a century this alloy has been used in the wrought heat-treated, naturally aged condition. The improvements in these properties produced by artificial ageing at a raised temperature of, for example, 175°C, were not exploited in the aircraft industry until about 1934.

In addition to the development of duralumin (first used as a main structural material by Junkers in 1917) three other causes contributed to the replacement of steel by aluminium alloys. These were a better understanding of the process of heat treatment, the introduction of extrusions in a wide range of sections and the use of pure aluminium cladding to provide greater resistance to corrosion. By 1938, three groups of aluminium alloys dominated the field of aircraft construction and, in fact, they retain their importance to the present day. The groups are separated by virtue of their chemical composition, to which they owe their capacity for strengthening under heat treatment.

The first group is contained under the general name duralumin having a typical composition of: 4 per cent copper, 0.5 per cent magnesium, 0.5 per cent manganese, 0.3 per cent silicon, 0.2 per cent iron, with the remainder aluminium. The naturally aged version was covered by Air Ministry Specification DTD 18 issued in 1924, while artificially aged duralumin came under Specification DTD 111 in 1929. DTD 111 provided for slight reductions in 0.1 per cent proof stress and tensile strength.

The second group of aluminium alloys differs from duralumin chiefly by the introduction of 1 to 2 per cent of nickel, a high content of magnesium and possible variations in the amounts of copper, silicon and iron. `Y' alloy, the oldest member of the group, has a typical composition of. 4 per cent copper, 2 per cent nickel, 1.5 cent magnesium, the remainder being aluminium and was covered by Specification DTD 58A issued in 1927. Its most important property was its retention of strength at high temperatures, which meant that it was a particularly suitable material for aero engine pistons. Its use in airframe construction has been of a limited nature only. Research by Rolls-Royce and development by High Duty Alloys Ltd produced the `RR' series of alloys. Based on Y alloy, the RR alloys had some of the nickel replaced by iron and the copper reduced. One of the earliest of these alloys, RR56 had approximately half of the 2 per cent nickel replaced by iron, the copper content reduced from 4 to 2 per cent, and was used for forgings and extrusions in aero engines and airframes.

The third and latest group depends upon the inclusion of zinc and magnesium and their high strength. Covered by Specification DTD 363 issued in 1937, these alloys had a nominal composition: 2.5 per cent copper, 5 per cent zinc, 3 per cent magnesium and up to 1 per cent nickel. In modern versions of this alloy nickel has been eliminated and provision made for the addition of chromium and further amounts of manganese.

Aircraft structural aluminium.

Of the three basic structural materials, namely wood, steel and aluminium alloy, only wood is no longer of significance except in laminates for non-structural bulkheads, floorings and furnishings. Most modern aircraft still rely on modified forms of the high strength aerospace aluminium alloys which were introduced during the early part of the 20th century. Steels are used where high strength, high stiffness and wear resistance are required. Other materials, such as titanium and fibre-reinforced composites first used about 1950, are finding expanding uses in airframe construction.

Modular Aluminium Frame

 


Automatic Sliding Aluminum Doors or Aluminium Track ?

Aluminum Sliding doors are stackable doors of many panels that move entirely to one side stacked neatly together. Their earliest form can be seen in traditional Japanese architecture. Now they are a definite feature of most public spaces like malls, hospitals etc. They are manufactured with a sophisticated track and frame system with a superior sliding mechanism. They offer an energetic look to any property and helps to maximize the light in the room and achieving the full potential of the view. They are a feasible alternative to bi-folding doors, Aluminium Track  in Reviews  with a sash width going up to 120 cms.

Aluminium Framed Doors

What are the advantages of automatic aluminum sliding frame doors

· Disabled friendly – These automatic doors open and close on their own.

· Safety features – they have up to date safety features and wireless remote control as well. Timers allow security personnel to lock the doors without having to be present near them.

Aluminum Framing System

· Gives Footfall account – the number of times the door opens can be obtained. This is useful footfall information in malls or shops.

· Style and variety. These doors are available in aluminum, which can be painted to depict the company’s logo etc. in an office. The latest frameless glass doors are very popular among offices, where they allow an uninterrupted view of the proceedings outside.

Aluminium Door And Frame

· They allow for heat or coolness retention since they open only when somebody approaches the door

What are the parts of an automatic aluminum sliding door

An automatic sliding door normally consists of the following parts

· Operator

· Header

· Track

· Carrier wheels

· Sliding door panel(s)

· Sidelite panel(s)

· Jambs

· Lock and activation/ safety setup

The door panels are made from extruded aluminum profiles and safety glass for visibility.

How To Make Aluminium Windows And Doors

Applications of automatic sliding aluminum doors

· Higher the traffic through the doors, heavier will be the moving panel.

Good for offices, hospitals, malls, banks, restaurants, art galleries etc.

· Fire and smoke door applications

· Energy conservation

· Security control, directional control or card access control applications

Aluminium Framed Doors

Testing procedures – The doors are made to open and close automatically for forty eight hours at a stretch.

How are they assembled?

· When they are shipped, the instructions for installation accompany them.

· The instructions are to be read fully

· Two or more people are required to install it

· Be careful when handling the glass

· Operate power tools carefully according to manufacturer’s instructions

Aluminium Doors Cape Town

What is weatherstripping?

Weatherstripping is sealing the sliding panels from the elements of the weather by an insulation strip. This has to be replaced when it gets worn out.

What are the things to watch out for in automatic sliding doors

· Installation is not easy – the tracks have to be perfectly aligned, and more than one person is required to install a sliding door.

· The track attracts dirt because it is a series of grooves in which dirt accumulates very fast

Aluminium Windows Sizes

· The doors get jammed sometimes because of the rust and dirt of the metal parts. They have to be changed in this case. Regular oiling helps too.

· If there is a power cut, they will get jammed and they have to be forced open.

Interesting Facts About Aluminium Track in Reviews:

 About Aluminium Track in Reviews:

Aluminium Profile

Aluminum doors are a popular choice for commercial properties adding strength and durability and reducing the risk of the door being broken down. While these may seem a great choice, especially from modern buildings, they do offer their own advantages and disadvantages that you need to be aware of.

Aluminum doors come with a host of advantages, which is what makes them such a popular choice in the commercial and industrial industries. These are also increasing in popularity in modern homes, where homeowners are looking to add that industrial chic to their finished design.

One of the biggest advantages to this option is the stability, strength and durability that these doors provide. Aluminum is exceptionally strong and this is displayed by the quality and strength of these products, which can last for many years, often outlasting many of the other materials available on the market today.

They work exceptionally well in buildings which have already incorporated aluminum windows, blending the two together to create a beautifully finished building that will stand the test of time.

Another advantage to these products is their ability to stand up in any weather conditions. It doesn't matter if you are based in the heart of the dessert or on the coast, which is constantly plagued by sea air. These products are weatherproof and strong and can handle vast temperature changes without signs of wear and tear.

You will find that aluminum doors are available from most suppliers, which is always a huge advantage. They can be found in most suppliers around the world and do not require that you hunt for them. If you have already chosen this material for your entry, then you should be able to find a reputable supplier who can supply and install the product for you in the shortest space of time.

Only in cases where the door is custom made will this process take longer, but in the majority of cases the supplier will have a number of doors in various sizes readily available and just waiting to be installed.

A huge advantage for any business owners is to know that their door won't require much maintenance over the years. The good news is that aluminum doors don't rust, so they are ideal in any climate, especially those that are close to the sea. Salty air can be exceptionally damaging, but these products are treated ensuring that they can withstand anything that is thrown their way.

Everything available on the market comes with some disadvantages and aluminum doors are no different. There are some cons to using these products over the other materials available on the market.

One of the disadvantages is that they tend to stain from constant water. If your building is in a very wet area which sees a lot of rain, you can expect some marks which will increase over time. While the product won't rust, the marks can be rather unsightly, so this needs to be taken into consideration when making a final decision on whether these are the right choice for your business or building.

Another disadvantage is that these can be more expensive that the other products available on the market. The metal prices are constantly fluctuating which makes it exceptionally difficult to budget until you have the product on order.

Most suppliers will be able to give you a final price when you ask for an estimate. Also bear in mind that because these are such high quality doors, they do require specialist installers who have experience with these products, ensuring they are installed to the highest standard.

Choosing someone to handle the installation that aren't knowledgeable on aluminum doors can result in you having to call out a repair company much sooner than anticipated.

Aluminium Track in Reviews

Aluminium Doors Durban

When purchasing your aluminum profile system, it is important to use aluminum profile systems that represent the latest in technological progress. They are available and many have highly competitive prices.

What is an aluminum profile system?

Aluminum profile systems are extruded shapes (tubing, bar stock, angles, rods, ducts, channels, air supply systems, pipe racks, etc.) made from aluminum. Extrusion is a process by which different aluminum shapes are formed from a cylindrical hydraulic press. The press forces the aluminum through the die and the extruded aluminum results in the desire shape.

What is the history of aluminum extrusions?

Patented in 1970, the extrusion process was first used to make lead pipes. Lead, copper, iron, and steel have a much longer history than aluminum, which was first identified in 1807.

At first aluminum was considered more precious than gold. However, with the advent of the smelting process and the modern hot extrusion process in the 1880's, it became extremely affordable. Aluminum, the metal most used for extrusion, can now be used with both hot and cold extrusion processes.

What are the benefits of an aluminum profile system?

There are many reasons why an aluminum system is preferred over other tooling. Some of the most important reasons are that it is not only affordable, but also durable, lightweight, and corrosion resistant - and many of the components are reusable, thus lowering the cost.

Respected manufacturers of aluminum profile promise shortened lead times, which is very important to most customers. This is possible because fewer tools are required to produce the final product, the designs are simple, and no welding or painting is required.

These manufacturers usually have a large stock of shapes and finishes on hand. If a customer needs a shape different that what is normally carried, that shape can be custom-made.

What are the uses of aluminum profile systems?

After World War II, when aluminum extrusions were used in the manufacturing of aircraft and other military uses, new uses were quickly found to be applicable for other industries. Aluminum extrusion is even used in the space industry.

If you are not familiar with the uses of aluminum profile in today's world, you might be surprised to know that they are used in computers, fixtures, everyday household appliances, home furnishings and interior design, power tools, and window frames.

In the world of manufacturing, aluminum systems are used in conveyor frames, fixtures, construction, protective barriers, work tables, electrical components, work bins, car radiators, automobile body and frame components, drive shafts and cylinder liners, and in special and series machines.

Porch Railing Materials

How To Make Aluminium Windows And Doors

Aluminum is a non-ferrous metal (which means it will not draw a magnet) that is lightweight. There are several different grades of scrap aluminum, and all of them vary in price. At most scrapyards, aluminum is broken down into the following grades:

Cast Aluminum

Radiators (clean and contaminated)

Extrusions (clean and contaminated)

Wheels (Clean and Chrome Plated)

Siding

Aluminum/Copper Radiators (clean and contaminated)

Old Sheet

Cast aluminum is very brittle and when broken, the inside will appear very grainy. A majority of the cast aluminum that comes across our scale is from auto parts. Transmission housings, engine cylinder heads, and electronic covers are all examples of cast aluminum auto parts. Other miscellaneous items that are made of cast aluminum include BBQ covers, some hot plates and skillets, and some light housings.

Aluminum radiators can be brought to our yard in two forms, contaminated or clean. A clean aluminum radiator must have all tanks, hoses, and steel and plastic removed. The plastic tanks on each end of the radiator will typically contain steel, sometimes however they will contain a tube made of aluminum or brass.

Extrusion is the process of pushing material through a die to give it a particular shape, very much like a Play-Doh spaghetti machine. The most common form of aluminum extrusion we see is window frames, but it is used very often in other framing systems and structural applications. Extrusions are broken down into contaminated and clean grades, with clean extrusion containing no steel, plastic, rubber, or insulation.

Aluminum Wheels come in two varieties, aluminum and chrome plated aluminum. Chrome plated wheels are worth a little less than pure aluminum due to the chrome contamination. Wheels with plastic face covers are also considered chrome plated due to the contamination of plastic and glue. Our listed wheel price assumes wheel weights, valve stems, and center caps are still attached. If these have been removed from your wheels discuss it with our scale operator and he may be able to increase your price.

Aluminum siding also includes gutters, downspouts, and other flat stock aluminum items. To receive the aluminum siding price, the material must not contain steel, Styrofoam, tar, insulation or any other contamination.

Aluminum/copper radiators are found in air conditioning units. They are copper tubes surrounded by aluminum fins. A clean aluminum/copper radiator will contain no steel flanges. If the steel flanges are cut off of a dirty aluminum/copper radiator, the rest of the radiator can be sold as clean and the flanges can be sold as aluminum breakage if they still contain some aluminum and copper.

Old sheet is the lowest grade of scrap aluminum and just about everything that has not been mentioned so far falls into this category. Some common aluminum sheet items include pots and pans, pop cans, lawn chairs, and screens. Siding containing excessive Styrofoam or tar will also be bought as aluminum sheet.

Black Aluminium Window Frames

 


Automatic Sliding Aluminum Doors or Aluminium Track ?

Aluminum Sliding doors are stackable doors of many panels that move entirely to one side stacked neatly together. Their earliest form can be seen in traditional Japanese architecture. Now they are a definite feature of most public spaces like malls, hospitals etc. They are manufactured with a sophisticated track and frame system with a superior sliding mechanism. They offer an energetic look to any property and helps to maximize the light in the room and achieving the full potential of the view. They are a feasible alternative to bi-folding doors, Aluminium Track  in Gauteng  with a sash width going up to 120 cms.

Aluminium Windows Durban

What are the advantages of automatic aluminum sliding frame doors

· Disabled friendly – These automatic doors open and close on their own.

· Safety features – they have up to date safety features and wireless remote control as well. Timers allow security personnel to lock the doors without having to be present near them.

Aluminium Windows Sizes

· Gives Footfall account – the number of times the door opens can be obtained. This is useful footfall information in malls or shops.

· Style and variety. These doors are available in aluminum, which can be painted to depict the company’s logo etc. in an office. The latest frameless glass doors are very popular among offices, where they allow an uninterrupted view of the proceedings outside.

Aluminium Windows Durban

· They allow for heat or coolness retention since they open only when somebody approaches the door

What are the parts of an automatic aluminum sliding door

An automatic sliding door normally consists of the following parts

· Operator

· Header

· Track

· Carrier wheels

· Sliding door panel(s)

· Sidelite panel(s)

· Jambs

· Lock and activation/ safety setup

The door panels are made from extruded aluminum profiles and safety glass for visibility.

Aluminium Window Frames For Sale

Applications of automatic sliding aluminum doors

· Higher the traffic through the doors, heavier will be the moving panel.

Good for offices, hospitals, malls, banks, restaurants, art galleries etc.

· Fire and smoke door applications

· Energy conservation

· Security control, directional control or card access control applications

How To Make Aluminium Windows And Doors

Testing procedures – The doors are made to open and close automatically for forty eight hours at a stretch.

How are they assembled?

· When they are shipped, the instructions for installation accompany them.

· The instructions are to be read fully

· Two or more people are required to install it

· Be careful when handling the glass

· Operate power tools carefully according to manufacturer’s instructions

Aluminium Windows Pretoria

What is weatherstripping?

Weatherstripping is sealing the sliding panels from the elements of the weather by an insulation strip. This has to be replaced when it gets worn out.

What are the things to watch out for in automatic sliding doors

· Installation is not easy – the tracks have to be perfectly aligned, and more than one person is required to install a sliding door.

· The track attracts dirt because it is a series of grooves in which dirt accumulates very fast

Aluminum Extrusion Framing

· The doors get jammed sometimes because of the rust and dirt of the metal parts. They have to be changed in this case. Regular oiling helps too.

· If there is a power cut, they will get jammed and they have to be forced open.

Interesting Facts About Aluminium Track in Guide:

 About Aluminium Track in Guide:

Aluminium Doors Cape Town

High strength aluminium alloys.

The origin of aluminium alloys in aircraft construction started with the first practical all-metal aircraft in 1915 made by Junkers in Germany, of materials said to be `iron and steel'. Steel presented the advantages of a high modulus of elasticity, high proof stress and high tensile strength. Unfortunately these were accompanied by a high specific gravity, almost three times that of the aluminium alloys and about ten times that of plywood. Aircraft designers during the 1930s were therefore forced to use steel in its thinnest forms. To ensure stability against buckling of the thin plate, intricate shapes for spar sections were devised.

In 1909 Alfred Wilm, in Germany, accidentally discovered that an aluminium alloy containing 3.5 per cent copper, 0.5 per cent magnesium and silicon and iron, as unintended impurities, spontaneously hardened after quenching from about 480°C. The patent rights of this material were acquired by Durener Metallwerke who marketed the alloy under the name Duralumin. For half a century this alloy has been used in the wrought heat-treated, naturally aged condition. The improvements in these properties produced by artificial ageing at a raised temperature of, for example, 175°C, were not exploited in the aircraft industry until about 1934.

In addition to the development of duralumin (first used as a main structural material by Junkers in 1917) three other causes contributed to the replacement of steel by aluminium alloys. These were a better understanding of the process of heat treatment, the introduction of extrusions in a wide range of sections and the use of pure aluminium cladding to provide greater resistance to corrosion. By 1938, three groups of aluminium alloys dominated the field of aircraft construction and, in fact, they retain their importance to the present day. The groups are separated by virtue of their chemical composition, to which they owe their capacity for strengthening under heat treatment.

The first group is contained under the general name duralumin having a typical composition of: 4 per cent copper, 0.5 per cent magnesium, 0.5 per cent manganese, 0.3 per cent silicon, 0.2 per cent iron, with the remainder aluminium. The naturally aged version was covered by Air Ministry Specification DTD 18 issued in 1924, while artificially aged duralumin came under Specification DTD 111 in 1929. DTD 111 provided for slight reductions in 0.1 per cent proof stress and tensile strength.

The second group of aluminium alloys differs from duralumin chiefly by the introduction of 1 to 2 per cent of nickel, a high content of magnesium and possible variations in the amounts of copper, silicon and iron. `Y' alloy, the oldest member of the group, has a typical composition of. 4 per cent copper, 2 per cent nickel, 1.5 cent magnesium, the remainder being aluminium and was covered by Specification DTD 58A issued in 1927. Its most important property was its retention of strength at high temperatures, which meant that it was a particularly suitable material for aero engine pistons. Its use in airframe construction has been of a limited nature only. Research by Rolls-Royce and development by High Duty Alloys Ltd produced the `RR' series of alloys. Based on Y alloy, the RR alloys had some of the nickel replaced by iron and the copper reduced. One of the earliest of these alloys, RR56 had approximately half of the 2 per cent nickel replaced by iron, the copper content reduced from 4 to 2 per cent, and was used for forgings and extrusions in aero engines and airframes.

The third and latest group depends upon the inclusion of zinc and magnesium and their high strength. Covered by Specification DTD 363 issued in 1937, these alloys had a nominal composition: 2.5 per cent copper, 5 per cent zinc, 3 per cent magnesium and up to 1 per cent nickel. In modern versions of this alloy nickel has been eliminated and provision made for the addition of chromium and further amounts of manganese.

Aircraft structural aluminium.

Of the three basic structural materials, namely wood, steel and aluminium alloy, only wood is no longer of significance except in laminates for non-structural bulkheads, floorings and furnishings. Most modern aircraft still rely on modified forms of the high strength aerospace aluminium alloys which were introduced during the early part of the 20th century. Steels are used where high strength, high stiffness and wear resistance are required. Other materials, such as titanium and fibre-reinforced composites first used about 1950, are finding expanding uses in airframe construction.

Aluminium Track in Guide

Aluminium Windows Sizes

Aluminium Extrusion process is undertaken by several companies today which offer extruded products to buyers. The extrusion process is generally utilized in production. It is used to create parts of homogeneous cross-sections and is done by squeezing the material all the way through an outlet under high-pressure. Aluminium extrusions are popular all over the world since the metal is easily available on the earth's crust. Besides, aluminium is widely used in several applications and it has numerous advantages as well.

Companies manufacturing extruded aluminium products offer extruded aluminium profiles, systems and finished products and semi-manufactured components. Enterprises manufacturing aluminium products are generally in search of products that can fulfill the needs of the customers. All through the manufacturing process, manufacturers must give close attention to quality, performance, economy and precision. Aluminium extrusion is generally simple, however, it might turn complex in case the demand of customers for extruded products differ. There is an assortment of aluminium extrusion profiles today in the market and people are keener to get the best product for any particular industry. If you are in the automobile industry and are in need of aluminium extruded products you must look for certain shapes that are just the apt for your industry. A company manufacturing aluminium extruded products manufacture according to the supply orders and are capable in offering all kinds of shapes. These extruded products are fabricated and customized and are unique according to needs.

There are several advantages to aluminium extrusion.

Aluminium is a widely available metal and through constant cross section several parts can be manufactured in the most reasonable way. The process of extrusion allows taking advantage of properties of aluminium and it expands. Thus, this manner indeed versatile as you can manufacture several shapes in just a simple process.

However, you need high-tech machinery for the process and you can produce shape indefinitely without spending a fortune in preparation costs. Hence, the process is totally economical. Roll-forming dies, in case you have heard about them they are costlier than extrusion die.

Aluminium extruded products have longer life than items made from steel or plastic. Besides, extrusion is meant to be the most environmentally friendly and economical solution. Aluminium as a metal even when not compared for its aluminium extrusion profiles and to weight properties. Even though it is light weight it has good strength. Aluminium is used for thermal and electrical conductivity. It is not only affordable it is also flexible in terms of shapes and size. It can adept to high temperatures and are thus preferred as utensils when used for heating water or boiling rice. It is corrosion resistant and can offer you good service over years. If you want you can easily recycle the metal. After steel all over the world aluminium is the most trusted and used metal. It can be fabricated to several shapes right from sheets, geometric shapes, to foils, tube, rod and wire.

So, if you are out there looking for aluminium extrusion profiles you can trust the process with closed eyes.

Understanding The Processes Used In Aluminum Extrusion

How To Make Aluminium Windows

Bifold doors are expensive but well worth the investment if you are considering renovations. Your house opens up to the garden and creates an amazing aesthetic when these doors are installed. It pays to exercise caution and care in a selection of the doors and consider various factors.


Price is not everything

The cheapest is not the best and the most expensive also is not necessarily the best. A Bifold door is not just panels put together; it is an entire system where design, engineering precision and choice of hardware plays an important in the door's looks and performance just as much as the bifold door installation does. Buying a well known international brand with local support is a good option.


Material of door

Bifolds can have wood, steel, uPVC or aluminum section frames. Wood can obstruct the view and be heavy. uPVC material can flex and distort which will affect the working of the door and there is a size limitation as well. Steel can be heavy. Aluminum is the best material for sections. It is relatively stable and does not tend to distort with temperature variations. From the maintenance point too aluminum scores because powder coated or natural anodized aluminum does not need frequent paint or maintenance.


Top hung or bottom rolling?

Bifold doors are available as top hung or bottom rolling types. If a strong enough beam is present then the top hung type is best because it does not collect leaves and debris and the frame conceals the mechanism from view.


Hardware and installation

Hardware is complex with bifold doors and must be precision engineered from quality materials besides being fitted just right during installation. Improper alignment can affect performance and cause stress on frames besides making the door hard to open and close. Quality systems have wheels that run on flat tracks and pivoted end doors for smooth movement even when the jamb does not allow much adjustment. Bifold door installation is important too when it comes to getting the threshold right to prevent rain seepage and yet creating a smooth transition that does not cause one to stub one's toes. Rain penetration is an important matter especially if the door is exposed. This is where the expertise of installer comes into play to provide a perfectly rebated rain-proof threshold. Security is another aspect to consider in the matter of bifold door hardware and a typical secure door would have multipoint locking system with shoot bolt for intermediate panels.


Single or double glazing


Energy conservation is important so double glazing is recommended. It will also provide some degree of acoustic insulation. Quality manufacturers provide U-values of 1.8w/sqmK or lower for such energy efficient bifold doors.


Screening

There are times when one may want an unimpeded view and there are times when one may want to shut out the light. Curtains are good but can impede the view. Venetian blinds that roll up all the way to the top may be ideal. If you choose a double glazed door then the blinds may be incorporated into the panels but at the cost of impeding the view. It is best to coordinate with the installer and clear this point as well before ordering a bifold door.

Aluminium Frame Profile