Extruded Aluminum Framing Sandton

Automatic Sliding Aluminum Doors or Extruded Aluminum Framing ?

Aluminum Sliding doors are stackable doors of many panels that move entirely to one side stacked neatly together. Their earliest form can be seen in traditional Japanese architecture. Now they are a definite feature of most public spaces like malls, hospitals etc. They are manufactured with a sophisticated track and frame system with a superior sliding mechanism. They offer an energetic look to any property and helps to maximize the light in the room and achieving the full potential of the view. They are a feasible alternative to bi-folding doors, Extruded Aluminum Framing  in Gauteng  with a sash width going up to 120 cms.

Aluminum Window Frame Extrusions

What are the advantages of automatic aluminum sliding frame doors

· Disabled friendly – These automatic doors open and close on their own.

· Safety features – they have up to date safety features and wireless remote control as well. Timers allow security personnel to lock the doors without having to be present near them.

Aluminium Door Frame Extrusions

· Gives Footfall account – the number of times the door opens can be obtained. This is useful footfall information in malls or shops.

· Style and variety. These doors are available in aluminum, which can be painted to depict the company’s logo etc. in an office. The latest frameless glass doors are very popular among offices, where they allow an uninterrupted view of the proceedings outside.

How To Make Aluminium Windows And Doors

· They allow for heat or coolness retention since they open only when somebody approaches the door

What are the parts of an automatic aluminum sliding door

An automatic sliding door normally consists of the following parts

· Operator

· Header

· Track

· Carrier wheels

· Sliding door panel(s)

· Sidelite panel(s)

· Jambs

· Lock and activation/ safety setup

The door panels are made from extruded aluminum profiles and safety glass for visibility.

Aluminium Doors Durban

Applications of automatic sliding aluminum doors

· Higher the traffic through the doors, heavier will be the moving panel.

Good for offices, hospitals, malls, banks, restaurants, art galleries etc.

· Fire and smoke door applications

· Energy conservation

· Security control, directional control or card access control applications

How To Make Aluminium Windows

Testing procedures – The doors are made to open and close automatically for forty eight hours at a stretch.

How are they assembled?

· When they are shipped, the instructions for installation accompany them.

· The instructions are to be read fully

· Two or more people are required to install it

· Be careful when handling the glass

· Operate power tools carefully according to manufacturer’s instructions

Aluminium Door Frame

What is weatherstripping?

Weatherstripping is sealing the sliding panels from the elements of the weather by an insulation strip. This has to be replaced when it gets worn out.

What are the things to watch out for in automatic sliding doors

· Installation is not easy – the tracks have to be perfectly aligned, and more than one person is required to install a sliding door.

· The track attracts dirt because it is a series of grooves in which dirt accumulates very fast

Aluminium Framed Doors

· The doors get jammed sometimes because of the rust and dirt of the metal parts. They have to be changed in this case. Regular oiling helps too.

· If there is a power cut, they will get jammed and they have to be forced open.

Interesting Facts About Extruded Aluminum Framing in South Africa:

 About Extruded Aluminum Framing in South Africa:

How To Make Aluminium Windows

Porch Railings - First And Lasting Impression

The porch railing is the first thing your visitors sees and in order that it makes a lasting impression, this article gives you tips for porch railings. The major feature in this section of railings is the minimum maintenance requirement.

The Form And Look - Essence Of Porch Railing

Since the porch is the first thing, a visitor observes after getting down from the car it always makes a lasting impression on the visitor. Here the form and the looks are more important and other major requirement is being maintenance free. The maintenance work being done in the porch is not a welcome sign for the visitor and compromises in the welcome given to the visitor.

Materials Used In Porch Railings

Materials have to be carefully selected for porch railings, workability is more important since the form, and looks are more important here. Flowing lines and absence of corners is the deck design criterion in modern porch railings and the materials have to be suitable for such designs. Most common materials are,

  1. Stainless Steel: Because of high workability and the fact that it maintains shine for a long time and that too in adverse conditions, stainless steel is the preferred material in porch railings. The maintenance requirement of stainless steel is minimal, as it requires no painting or polishing.
  2. PVC coated steel: The steel can be coated with PVC in multiple colors. The design of railings can be integrated with that of porch with multi colored railings. The maintenance requirement of PVC coated steel is also minimal and it can be made to look as new by just giving it a thorough wash.
  3. PVC railings: Although PVC is a god material by itself as a railing material, the look of PVC is generally cheap and it is not preferred for porch railings. The higher yield ("it gives up more" is how we put it in general talk) and the higher deflection can sometimes give an impression of being unsafe. Therefore, it is not used as material for porch railing.
  4. Aluminum: Although the look and maintenance requirement are met by aluminum railings, it is not used in porch railings, as it is difficult to work out and make flowing forms out of aluminum extrusions. Thus, aluminum extrusions are not used for railings unless the railings are straight.
Make your choice of material porch railings and make a good first impression on your visitor and it sure will last for a long time.

Extruded Aluminum Framing in South Africa

How To Make Aluminium Windows And Doors

High strength aluminium alloys.

The origin of aluminium alloys in aircraft construction started with the first practical all-metal aircraft in 1915 made by Junkers in Germany, of materials said to be `iron and steel'. Steel presented the advantages of a high modulus of elasticity, high proof stress and high tensile strength. Unfortunately these were accompanied by a high specific gravity, almost three times that of the aluminium alloys and about ten times that of plywood. Aircraft designers during the 1930s were therefore forced to use steel in its thinnest forms. To ensure stability against buckling of the thin plate, intricate shapes for spar sections were devised.

In 1909 Alfred Wilm, in Germany, accidentally discovered that an aluminium alloy containing 3.5 per cent copper, 0.5 per cent magnesium and silicon and iron, as unintended impurities, spontaneously hardened after quenching from about 480°C. The patent rights of this material were acquired by Durener Metallwerke who marketed the alloy under the name Duralumin. For half a century this alloy has been used in the wrought heat-treated, naturally aged condition. The improvements in these properties produced by artificial ageing at a raised temperature of, for example, 175°C, were not exploited in the aircraft industry until about 1934.

In addition to the development of duralumin (first used as a main structural material by Junkers in 1917) three other causes contributed to the replacement of steel by aluminium alloys. These were a better understanding of the process of heat treatment, the introduction of extrusions in a wide range of sections and the use of pure aluminium cladding to provide greater resistance to corrosion. By 1938, three groups of aluminium alloys dominated the field of aircraft construction and, in fact, they retain their importance to the present day. The groups are separated by virtue of their chemical composition, to which they owe their capacity for strengthening under heat treatment.

The first group is contained under the general name duralumin having a typical composition of: 4 per cent copper, 0.5 per cent magnesium, 0.5 per cent manganese, 0.3 per cent silicon, 0.2 per cent iron, with the remainder aluminium. The naturally aged version was covered by Air Ministry Specification DTD 18 issued in 1924, while artificially aged duralumin came under Specification DTD 111 in 1929. DTD 111 provided for slight reductions in 0.1 per cent proof stress and tensile strength.

The second group of aluminium alloys differs from duralumin chiefly by the introduction of 1 to 2 per cent of nickel, a high content of magnesium and possible variations in the amounts of copper, silicon and iron. `Y' alloy, the oldest member of the group, has a typical composition of. 4 per cent copper, 2 per cent nickel, 1.5 cent magnesium, the remainder being aluminium and was covered by Specification DTD 58A issued in 1927. Its most important property was its retention of strength at high temperatures, which meant that it was a particularly suitable material for aero engine pistons. Its use in airframe construction has been of a limited nature only. Research by Rolls-Royce and development by High Duty Alloys Ltd produced the `RR' series of alloys. Based on Y alloy, the RR alloys had some of the nickel replaced by iron and the copper reduced. One of the earliest of these alloys, RR56 had approximately half of the 2 per cent nickel replaced by iron, the copper content reduced from 4 to 2 per cent, and was used for forgings and extrusions in aero engines and airframes.

The third and latest group depends upon the inclusion of zinc and magnesium and their high strength. Covered by Specification DTD 363 issued in 1937, these alloys had a nominal composition: 2.5 per cent copper, 5 per cent zinc, 3 per cent magnesium and up to 1 per cent nickel. In modern versions of this alloy nickel has been eliminated and provision made for the addition of chromium and further amounts of manganese.

Aircraft structural aluminium.

Of the three basic structural materials, namely wood, steel and aluminium alloy, only wood is no longer of significance except in laminates for non-structural bulkheads, floorings and furnishings. Most modern aircraft still rely on modified forms of the high strength aerospace aluminium alloys which were introduced during the early part of the 20th century. Steels are used where high strength, high stiffness and wear resistance are required. Other materials, such as titanium and fibre-reinforced composites first used about 1950, are finding expanding uses in airframe construction.

Aluminum Folding Doors - Add Elegance by Choosing Secure Aluminium Doors and Windows for Your Home

How To Make Aluminium Windows And Doors

Bifold doors are expensive but well worth the investment if you are considering renovations. Your house opens up to the garden and creates an amazing aesthetic when these doors are installed. It pays to exercise caution and care in a selection of the doors and consider various factors.


Price is not everything

The cheapest is not the best and the most expensive also is not necessarily the best. A Bifold door is not just panels put together; it is an entire system where design, engineering precision and choice of hardware plays an important in the door's looks and performance just as much as the bifold door installation does. Buying a well known international brand with local support is a good option.


Material of door

Bifolds can have wood, steel, uPVC or aluminum section frames. Wood can obstruct the view and be heavy. uPVC material can flex and distort which will affect the working of the door and there is a size limitation as well. Steel can be heavy. Aluminum is the best material for sections. It is relatively stable and does not tend to distort with temperature variations. From the maintenance point too aluminum scores because powder coated or natural anodized aluminum does not need frequent paint or maintenance.


Top hung or bottom rolling?

Bifold doors are available as top hung or bottom rolling types. If a strong enough beam is present then the top hung type is best because it does not collect leaves and debris and the frame conceals the mechanism from view.


Hardware and installation

Hardware is complex with bifold doors and must be precision engineered from quality materials besides being fitted just right during installation. Improper alignment can affect performance and cause stress on frames besides making the door hard to open and close. Quality systems have wheels that run on flat tracks and pivoted end doors for smooth movement even when the jamb does not allow much adjustment. Bifold door installation is important too when it comes to getting the threshold right to prevent rain seepage and yet creating a smooth transition that does not cause one to stub one's toes. Rain penetration is an important matter especially if the door is exposed. This is where the expertise of installer comes into play to provide a perfectly rebated rain-proof threshold. Security is another aspect to consider in the matter of bifold door hardware and a typical secure door would have multipoint locking system with shoot bolt for intermediate panels.


Single or double glazing


Energy conservation is important so double glazing is recommended. It will also provide some degree of acoustic insulation. Quality manufacturers provide U-values of 1.8w/sqmK or lower for such energy efficient bifold doors.


Screening

There are times when one may want an unimpeded view and there are times when one may want to shut out the light. Curtains are good but can impede the view. Venetian blinds that roll up all the way to the top may be ideal. If you choose a double glazed door then the blinds may be incorporated into the panels but at the cost of impeding the view. It is best to coordinate with the installer and clear this point as well before ordering a bifold door.

Aluminum Door Frame Extrusions

 


Automatic Sliding Aluminum Doors or Extruded Aluminum Framing ?

Aluminum Sliding doors are stackable doors of many panels that move entirely to one side stacked neatly together. Their earliest form can be seen in traditional Japanese architecture. Now they are a definite feature of most public spaces like malls, hospitals etc. They are manufactured with a sophisticated track and frame system with a superior sliding mechanism. They offer an energetic look to any property and helps to maximize the light in the room and achieving the full potential of the view. They are a feasible alternative to bi-folding doors, Extruded Aluminum Framing  in Best  with a sash width going up to 120 cms.

Aluminum Framing System

What are the advantages of automatic aluminum sliding frame doors

· Disabled friendly – These automatic doors open and close on their own.

· Safety features – they have up to date safety features and wireless remote control as well. Timers allow security personnel to lock the doors without having to be present near them.

Aluminium Windows Pretoria

· Gives Footfall account – the number of times the door opens can be obtained. This is useful footfall information in malls or shops.

· Style and variety. These doors are available in aluminum, which can be painted to depict the company’s logo etc. in an office. The latest frameless glass doors are very popular among offices, where they allow an uninterrupted view of the proceedings outside.

Aluminium Frame Profile

· They allow for heat or coolness retention since they open only when somebody approaches the door

What are the parts of an automatic aluminum sliding door

An automatic sliding door normally consists of the following parts

· Operator

· Header

· Track

· Carrier wheels

· Sliding door panel(s)

· Sidelite panel(s)

· Jambs

· Lock and activation/ safety setup

The door panels are made from extruded aluminum profiles and safety glass for visibility.

Aluminium Frame Company

Applications of automatic sliding aluminum doors

· Higher the traffic through the doors, heavier will be the moving panel.

Good for offices, hospitals, malls, banks, restaurants, art galleries etc.

· Fire and smoke door applications

· Energy conservation

· Security control, directional control or card access control applications

Aluminium Framed Doors

Testing procedures – The doors are made to open and close automatically for forty eight hours at a stretch.

How are they assembled?

· When they are shipped, the instructions for installation accompany them.

· The instructions are to be read fully

· Two or more people are required to install it

· Be careful when handling the glass

· Operate power tools carefully according to manufacturer’s instructions

Aluminium Profile Catalog

What is weatherstripping?

Weatherstripping is sealing the sliding panels from the elements of the weather by an insulation strip. This has to be replaced when it gets worn out.

What are the things to watch out for in automatic sliding doors

· Installation is not easy – the tracks have to be perfectly aligned, and more than one person is required to install a sliding door.

· The track attracts dirt because it is a series of grooves in which dirt accumulates very fast

Aluminium Framed Doors

· The doors get jammed sometimes because of the rust and dirt of the metal parts. They have to be changed in this case. Regular oiling helps too.

· If there is a power cut, they will get jammed and they have to be forced open.

Interesting Facts About Extruded Aluminum Framing in Guide:

 About Extruded Aluminum Framing in Guide:

Aluminium Doors Durban

When building or renovating, people often consider the windows and doors last. After all, don't they all look the same apart from the sizes? And this is ironic when they cover nearly half of the total surface of the house. Whether you choose wooden, iron, concrete or aluminium doors and windows, the right choice can boost the value of the house, provide ample natural lighting, enhance the design and give a feeling of space. Apart from the design, there's also the issue of workability. This pertains to where your windows or doors will be located, how they open, and whether you need enough ventilation or if the door or window just serves their primary purpose.

Comparing Aluminium Vs.Wood

There's a distinct edge in choosing aluminium folding doors over timber and that's less maintenance over their expected lifecycle. You won't have to worry about termites or carpenter bees boring holes in your wooden door or window frames. When you require double glazing, for example, aluminium is the right choice as it is more pliant to accepting the additional embellishment. Make sure, however, to choose the right installers since come companies cutting corners and fail to apply waterproofing techniques which ultimately result to nagging soggy and clammy issues on the frames, window sills and doors.

Choosing the Right Material

Aluminium is also identified as less secure compared to wood but this is not the case when choosing the right company that can install a sliding security door in your home. You only need superior quality aluminium. Be wary about doped aluminium or the lower-grade aluminium alloy. Aluminium is graded according to the purity of the material. Ask the installer if the product passes national standards on thickness and yield strength. This can also be your legal remedy when the installer cuts on corners and install the wrong product. Apart from the practical issues, you also want to ensure the quality of the finished product. Windows and doors are supposed to enhance the look of your house so you don't focus on the functionality alone.

Price Points

The industry is brimming with installers of aluminium windows or folding doors and this is good for the consumers in the sense that competition drives prices down. Remember, the right windows and doors will look light on your home, introduce elegance, offer durability (which means less cost on maintenance), perfect for contemporary-style homes, and gives the appearance of space.

Extruded Aluminum Framing in Guide

How To Make Aluminium Windows And Doors

Aluminum is the preferred material for door and window frames due to its inherent structural and aesthetic properties. Doors and windows made of aluminum frames with glass glazing may look the same from a distance but take a closer look and the difference between quality product and one that is fabricated by a local fabricator becomes apparent. If you are investing in doors and windows it pays to buy only quality products.


Seamless integration of hardware with aluminum frame


The looks as well as performance of aluminum windows are dependent on and influenced by the way hardware is integrated into the frame. If the window has hinges then the way hinges are designed and fitted to the frame has a bearing on ease of opening and closing as well as reducing gaps and thereby preventing energy losses. Quality manufacturers design and manufacture their own hardware to go along with windows and doors.


Precision fabrication


Most general fabricators do not work to tight tolerances while fabricating frames from aluminum profiles. There can be gaps between joins and this can look unseemly and if the frame sections are not well aligned, closing and opening them becomes a chore. Quality manufacturers also include thermal breaks and a foam core that provide additional insulation.


Finish


Quality manufacturers offer aluminum in a variety of finishes such as natural anodized finish in various shades, metallic colours, permanent colour fast powder coating and woodgrain foil overlay for a natural look. You can go a step further and choose aluminum frames that have one colour finish for interiors and another on the exterior to match building facades.


Single or double or triple glazing?


When double glazed windows offer so many advantages there is little point in saving some money by choosing single glazing. Double or even triple glazing is better from energy conservation as well as acoustic insulation perspective. Some advanced manufacturers offer gas filled and totally sealed double glazing. You also have the choice of blinds integrated inside the glazing, which makes for a neater appearance and ease of use. When one talks about glazing, it must be kept in mind that glass varies widely. It is recommended to look for windows with low E internal glass and possibly toughened glass so that, in the event the glass breaks, the floor is not littered with glass shards. You can also select glass that is coated to reflect heat and thus reduce energy consumption.


How secure are the aluminum windows?


Quality manufacturers offer windows that conform to British Standards PAS 24:2012. Material, design and manufacture of the windows makes it difficult for would be burglars to force the windows. You should look for multipoint steel locking system and internal glazing for better security.


It pays to invest in world recognized brands offering quality aluminum windows. Windows look perfect from inside and from the outside. They will be easy to operate and you will enjoy their use for years with minimum maintenance. It may cost more initially but a quality aluminum window also adds to the value of your house.

How to Choose Quality Aluminum Windows and Doors

Aluminium Framed Doors

High strength aluminium alloys.

The origin of aluminium alloys in aircraft construction started with the first practical all-metal aircraft in 1915 made by Junkers in Germany, of materials said to be `iron and steel'. Steel presented the advantages of a high modulus of elasticity, high proof stress and high tensile strength. Unfortunately these were accompanied by a high specific gravity, almost three times that of the aluminium alloys and about ten times that of plywood. Aircraft designers during the 1930s were therefore forced to use steel in its thinnest forms. To ensure stability against buckling of the thin plate, intricate shapes for spar sections were devised.

In 1909 Alfred Wilm, in Germany, accidentally discovered that an aluminium alloy containing 3.5 per cent copper, 0.5 per cent magnesium and silicon and iron, as unintended impurities, spontaneously hardened after quenching from about 480°C. The patent rights of this material were acquired by Durener Metallwerke who marketed the alloy under the name Duralumin. For half a century this alloy has been used in the wrought heat-treated, naturally aged condition. The improvements in these properties produced by artificial ageing at a raised temperature of, for example, 175°C, were not exploited in the aircraft industry until about 1934.

In addition to the development of duralumin (first used as a main structural material by Junkers in 1917) three other causes contributed to the replacement of steel by aluminium alloys. These were a better understanding of the process of heat treatment, the introduction of extrusions in a wide range of sections and the use of pure aluminium cladding to provide greater resistance to corrosion. By 1938, three groups of aluminium alloys dominated the field of aircraft construction and, in fact, they retain their importance to the present day. The groups are separated by virtue of their chemical composition, to which they owe their capacity for strengthening under heat treatment.

The first group is contained under the general name duralumin having a typical composition of: 4 per cent copper, 0.5 per cent magnesium, 0.5 per cent manganese, 0.3 per cent silicon, 0.2 per cent iron, with the remainder aluminium. The naturally aged version was covered by Air Ministry Specification DTD 18 issued in 1924, while artificially aged duralumin came under Specification DTD 111 in 1929. DTD 111 provided for slight reductions in 0.1 per cent proof stress and tensile strength.

The second group of aluminium alloys differs from duralumin chiefly by the introduction of 1 to 2 per cent of nickel, a high content of magnesium and possible variations in the amounts of copper, silicon and iron. `Y' alloy, the oldest member of the group, has a typical composition of. 4 per cent copper, 2 per cent nickel, 1.5 cent magnesium, the remainder being aluminium and was covered by Specification DTD 58A issued in 1927. Its most important property was its retention of strength at high temperatures, which meant that it was a particularly suitable material for aero engine pistons. Its use in airframe construction has been of a limited nature only. Research by Rolls-Royce and development by High Duty Alloys Ltd produced the `RR' series of alloys. Based on Y alloy, the RR alloys had some of the nickel replaced by iron and the copper reduced. One of the earliest of these alloys, RR56 had approximately half of the 2 per cent nickel replaced by iron, the copper content reduced from 4 to 2 per cent, and was used for forgings and extrusions in aero engines and airframes.

The third and latest group depends upon the inclusion of zinc and magnesium and their high strength. Covered by Specification DTD 363 issued in 1937, these alloys had a nominal composition: 2.5 per cent copper, 5 per cent zinc, 3 per cent magnesium and up to 1 per cent nickel. In modern versions of this alloy nickel has been eliminated and provision made for the addition of chromium and further amounts of manganese.

Aircraft structural aluminium.

Of the three basic structural materials, namely wood, steel and aluminium alloy, only wood is no longer of significance except in laminates for non-structural bulkheads, floorings and furnishings. Most modern aircraft still rely on modified forms of the high strength aerospace aluminium alloys which were introduced during the early part of the 20th century. Steels are used where high strength, high stiffness and wear resistance are required. Other materials, such as titanium and fibre-reinforced composites first used about 1950, are finding expanding uses in airframe construction.

How To Make Aluminium Windows And Doors

 


Automatic Sliding Aluminum Doors or Extruded Aluminum Framing ?

Aluminum Sliding doors are stackable doors of many panels that move entirely to one side stacked neatly together. Their earliest form can be seen in traditional Japanese architecture. Now they are a definite feature of most public spaces like malls, hospitals etc. They are manufactured with a sophisticated track and frame system with a superior sliding mechanism. They offer an energetic look to any property and helps to maximize the light in the room and achieving the full potential of the view. They are a feasible alternative to bi-folding doors, Extruded Aluminum Framing  in Best  with a sash width going up to 120 cms.

Aluminium Doors Durban

What are the advantages of automatic aluminum sliding frame doors

· Disabled friendly – These automatic doors open and close on their own.

· Safety features – they have up to date safety features and wireless remote control as well. Timers allow security personnel to lock the doors without having to be present near them.

Aluminium Framed Doors

· Gives Footfall account – the number of times the door opens can be obtained. This is useful footfall information in malls or shops.

· Style and variety. These doors are available in aluminum, which can be painted to depict the company’s logo etc. in an office. The latest frameless glass doors are very popular among offices, where they allow an uninterrupted view of the proceedings outside.

Aluminum Framing System

· They allow for heat or coolness retention since they open only when somebody approaches the door

What are the parts of an automatic aluminum sliding door

An automatic sliding door normally consists of the following parts

· Operator

· Header

· Track

· Carrier wheels

· Sliding door panel(s)

· Sidelite panel(s)

· Jambs

· Lock and activation/ safety setup

The door panels are made from extruded aluminum profiles and safety glass for visibility.

Aluminum Window Frame Extrusions

Applications of automatic sliding aluminum doors

· Higher the traffic through the doors, heavier will be the moving panel.

Good for offices, hospitals, malls, banks, restaurants, art galleries etc.

· Fire and smoke door applications

· Energy conservation

· Security control, directional control or card access control applications

Aluminium Windows Cape Town

Testing procedures – The doors are made to open and close automatically for forty eight hours at a stretch.

How are they assembled?

· When they are shipped, the instructions for installation accompany them.

· The instructions are to be read fully

· Two or more people are required to install it

· Be careful when handling the glass

· Operate power tools carefully according to manufacturer’s instructions

Modular Aluminium Frame

What is weatherstripping?

Weatherstripping is sealing the sliding panels from the elements of the weather by an insulation strip. This has to be replaced when it gets worn out.

What are the things to watch out for in automatic sliding doors

· Installation is not easy – the tracks have to be perfectly aligned, and more than one person is required to install a sliding door.

· The track attracts dirt because it is a series of grooves in which dirt accumulates very fast

Aluminium Framed Doors

· The doors get jammed sometimes because of the rust and dirt of the metal parts. They have to be changed in this case. Regular oiling helps too.

· If there is a power cut, they will get jammed and they have to be forced open.

Interesting Facts About Extruded Aluminum Framing in Top:

 About Extruded Aluminum Framing in Top:

Aluminium Windows Sizes

When you are refurbishing or extending your house or building a new one you will face the question of which door material to use. Aluminum doors or steel doors? The most commonly used door materials are the aluminium, wood, PVC, steel, but which is better? Let's show the facts and situations to use either aluminium doors or steel doors.

One of the most important characteristics of a door is the durability. The durability greatly depends on the environment where the door is implemented, the conditions of use or the area where it is installed.

Exteriors

This is one of the biggest obstacles for using doors. Although we can use some stainless steel that combines iron, chromium, and many other elements. It can be a little expensive if we want great corrosion resistance and thus, durability. Stainless steel can get marked up with fingerprints and grease, develop discolouration, scratches and eventually rust. In coastal areas, the corrosion issues get worse decreasing the useful life of the steel door, so the maintenance with protective layers of paint is periodically needed.

On the other hand, the aluminium doors are the perfect choice for outsides since it has a natural resistance to corrosion that makes it maintenance free. For example, the aluminium doors are even lighter than their steel counterparts at a very similar price, and the flexibility of the material offers much more profile styles than doors. So let's say aluminium doors are mostly recommended for the steel doors for the outsides unless you need the structural strength of the steel for hard use or safety reasons.

Insides

In this situation, the steel doors are preferred since they are cheaper, safer and more resistant than aluminium since it cannot be kicked and is extremely hard to bend, even using tools. The aluminium counterpart can be more expensive, but it can give a premium feel to the door when the correct door style is used. Additionally, the aluminium doors offer a great variety of finishes and colours that result in a nice look in the right circumstances. The steel doors can be stylish too since they do an excellent job of imitating the wood with the use of some advanced state-of-art door.

Home security

Home intruders are one of the major concerns for every family guy. The best option for security issues are the steel doors since the steel is one of the strongest material to manufacture a door. The steel door won't crack or warp, and there are some high-security steel door models that feature a large number of locks and hinges with different style designs. There is also some high-security doors that use aluminium as a main metal component, so the aluminium doors are not left behind on this subject.

Thermal insulations

Both door presentations are not solid steel or aluminium. They have foam, wood, polyurethane or polystyrene foam or fiberglass core to prevent the heat transfer. So, in this case, both doors have a great thermal insulation that will help you to keep your house warm in the winter and cool in the summer, making them energy efficient.

Esthetics
As mentioned before, the aluminium offers a choice of colours to match the style of your home. Meanwhile, when we want to avoid the rust on the steel, the galvanized steel is recommended. Nonetheless, this kind of steel is not easy to customize or paint. If you want a customized steel door that endures at lifetime, you have to pay for the premium stainless steel, which is not cheap at all. An alternative to premium stainless steel but not as good-looking is a coat of weather-resistant paint since the steel can accept a large variety of paint types but they must be weather-resistant to prevent corrosion and be falling apart because of the rust expansion in the steel door.

Cost

The cost of the steel and aluminium doors depends greatly on the security level, style, and corrosion resistance. The steel doors can be really inexpensive when the corrosion resistance is not required, and its maintenance is easy to do. But if you need corrosion resistance, galvanized steel could be a cheap but not an aesthetic option. The expensive premium steel offers the bests doors in terms of aesthetics, security and endurance options.

In the case of the aluminium doors, they are cheaper than premium steel doors, but they offer improved natural corrosion resistance for a longer useful life. Nonetheless, the aluminium doors are not made for hard use which can hinder its useful life and result in an extra cost by replacing the door after a rigorous use as is in a patio with kids and pets.

Verdict

Both doors have enormous potential in different areas, but if you do not care about saving money, I think the winners are the doors thanks to its great versatility and variety of presentation for almost any budget and environment. The steel doors are a reliable option for security, durability, and aesthetics.

The aluminium doors are quite good as well, they offer a maintenance free material with excellent durability for a reasonable price. However, it lacks structural strength in comparison to the steel doors. You have the ultimate decision to choose the best door that can fit your style, secure and budget requirements.

Extruded Aluminum Framing in Top

Black Aluminium Window Frames

Metal fabrication equipment is used in important facets of the manufacturing industry. It serves the structural steel industry very well as it helps in other metal fabricating industries. Producers of this equipment have clients ranging from small and medium size enterprises to iron and fabricating shops and large construction companies.

The most common types of metal fabrication equipment include hydraulic press brakes, pinch rolls, plate shears, bending machines, tube benders and plate rolls. All these machines will help the entire workload easier. Look into the features of these types of equipment.

Hydraulic press brakes

Hydraulic press brakes are created to deliver the kind of ease and comfort an operator is looking for in the product. They are equipped with a ram system to provide maximum efficiency on operator control. Down stroking ram systems are favored over up stroking systems because they lessen operator fatigue. The system with a thick ram makes it easier to move in between extra heavy frames. Alongside with this component, a steel torsion is also utilized. At times, the hydraulic press brake contains limit switches and overload protection systems. Speeds of the press brakes are adjustable and controllable as well.

Hydraulic shears

This is yet another type of metal fabrication equipment used in order to make the job of individuals easier. Looking for those with foot pedals and emergency stops is highly favorable for the company. Programmable axes may help control blade gaps, stroke length, back gauge and shearing times. At times, the shears are also commendable for its capacity to transfer balls and load metal sheets. It also possesses a full protection guard system. Shears are used in order to provide smooth and quiet operation while cutting or manufacturing metal parts.

Plate bending machines

Plate bending machines vary according to specifications of the particular industry making use of this industrial product. There are goods that are best suited for small to medium production requirement for pipes, angles, flats and tubes. Ornamental and job shops will surely favor this type of bending machine. There are plate bending machines that are versatile enough with hydraulic forming features. This is commendable in industries were pipe, tube and aluminum extrusion bending is required.

There are other types of metal fabrication equipment sold by a lot of manufacturers. At times, this equipment may be available from second hand machine stores. What matters is that the machine will work for the particular manufacturing process it has to serve.

Aluminium Doors or Steel Doors, Which Are Better?

How To Make Aluminium Windows And Doors

When purchasing your aluminum profile system, it is important to use aluminum profile systems that represent the latest in technological progress. They are available and many have highly competitive prices.

What is an aluminum profile system?

Aluminum profile systems are extruded shapes (tubing, bar stock, angles, rods, ducts, channels, air supply systems, pipe racks, etc.) made from aluminum. Extrusion is a process by which different aluminum shapes are formed from a cylindrical hydraulic press. The press forces the aluminum through the die and the extruded aluminum results in the desire shape.

What is the history of aluminum extrusions?

Patented in 1970, the extrusion process was first used to make lead pipes. Lead, copper, iron, and steel have a much longer history than aluminum, which was first identified in 1807.

At first aluminum was considered more precious than gold. However, with the advent of the smelting process and the modern hot extrusion process in the 1880's, it became extremely affordable. Aluminum, the metal most used for extrusion, can now be used with both hot and cold extrusion processes.

What are the benefits of an aluminum profile system?

There are many reasons why an aluminum system is preferred over other tooling. Some of the most important reasons are that it is not only affordable, but also durable, lightweight, and corrosion resistant - and many of the components are reusable, thus lowering the cost.

Respected manufacturers of aluminum profile promise shortened lead times, which is very important to most customers. This is possible because fewer tools are required to produce the final product, the designs are simple, and no welding or painting is required.

These manufacturers usually have a large stock of shapes and finishes on hand. If a customer needs a shape different that what is normally carried, that shape can be custom-made.

What are the uses of aluminum profile systems?

After World War II, when aluminum extrusions were used in the manufacturing of aircraft and other military uses, new uses were quickly found to be applicable for other industries. Aluminum extrusion is even used in the space industry.

If you are not familiar with the uses of aluminum profile in today's world, you might be surprised to know that they are used in computers, fixtures, everyday household appliances, home furnishings and interior design, power tools, and window frames.

In the world of manufacturing, aluminum systems are used in conveyor frames, fixtures, construction, protective barriers, work tables, electrical components, work bins, car radiators, automobile body and frame components, drive shafts and cylinder liners, and in special and series machines.

Aluminium Framed Doors