Aluminium Section Easy

Automatic Sliding Aluminum Doors or Aluminium Section ?

Aluminum Sliding doors are stackable doors of many panels that move entirely to one side stacked neatly together. Their earliest form can be seen in traditional Japanese architecture. Now they are a definite feature of most public spaces like malls, hospitals etc. They are manufactured with a sophisticated track and frame system with a superior sliding mechanism. They offer an energetic look to any property and helps to maximize the light in the room and achieving the full potential of the view. They are a feasible alternative to bi-folding doors, Aluminium Section  in South Africa  with a sash width going up to 120 cms.

How To Make Aluminium Windows And Doors

What are the advantages of automatic aluminum sliding frame doors

· Disabled friendly – These automatic doors open and close on their own.

· Safety features – they have up to date safety features and wireless remote control as well. Timers allow security personnel to lock the doors without having to be present near them.

Aluminium Windows Cape Town

· Gives Footfall account – the number of times the door opens can be obtained. This is useful footfall information in malls or shops.

· Style and variety. These doors are available in aluminum, which can be painted to depict the company’s logo etc. in an office. The latest frameless glass doors are very popular among offices, where they allow an uninterrupted view of the proceedings outside.

Aluminium Windows Cape Town

· They allow for heat or coolness retention since they open only when somebody approaches the door

What are the parts of an automatic aluminum sliding door

An automatic sliding door normally consists of the following parts

· Operator

· Header

· Track

· Carrier wheels

· Sliding door panel(s)

· Sidelite panel(s)

· Jambs

· Lock and activation/ safety setup

The door panels are made from extruded aluminum profiles and safety glass for visibility.

Aluminium Windows Cape Town

Applications of automatic sliding aluminum doors

· Higher the traffic through the doors, heavier will be the moving panel.

Good for offices, hospitals, malls, banks, restaurants, art galleries etc.

· Fire and smoke door applications

· Energy conservation

· Security control, directional control or card access control applications

Aluminium Framed Doors

Testing procedures – The doors are made to open and close automatically for forty eight hours at a stretch.

How are they assembled?

· When they are shipped, the instructions for installation accompany them.

· The instructions are to be read fully

· Two or more people are required to install it

· Be careful when handling the glass

· Operate power tools carefully according to manufacturer’s instructions

Aluminum Window Frame Extrusions

What is weatherstripping?

Weatherstripping is sealing the sliding panels from the elements of the weather by an insulation strip. This has to be replaced when it gets worn out.

What are the things to watch out for in automatic sliding doors

· Installation is not easy – the tracks have to be perfectly aligned, and more than one person is required to install a sliding door.

· The track attracts dirt because it is a series of grooves in which dirt accumulates very fast

Aluminum Window Frame Extrusions

· The doors get jammed sometimes because of the rust and dirt of the metal parts. They have to be changed in this case. Regular oiling helps too.

· If there is a power cut, they will get jammed and they have to be forced open.

Interesting Facts About Aluminium Section in Latest:

 About Aluminium Section in Latest:

How To Make Aluminium Windows And Doors

The process of aluminum extrusion is simple and easy however it is very significant to know why extrusion is so important. In general metals like steel and aluminum is put to use in several industries, right from automobile, to telecommunication, transport, utensil manufacturing and at times even in the toy industry. Thus, both of these metals are in huge demand and find place is almost all the major manufacturing industries in the world.

Just after steel, aluminum is the other metal which is hugely popular all over the world. This can put in a manner stating that aluminum is the second most popular metal in the globe after steel. The former is widely available, has impressive properties, and is affordable, light weight, can withstand high temperatures and so on. And above all the aluminum extrusion involved in getting different shapes and forms for suppliers is cost-effective and simple. Both in US and Europe building industry and the telecom as well is highly dependent on aluminum extruded products. These products find a number of usages and are used in many applications.

So, what is aluminum extrusion? This is a process through which aluminum is given certain shapes and forms. It starts with the hot cylindrical billet of aluminum which is pushed through a shaped die. The billet is cut from DC cast log and placed in heated container (450°C - 500°C). When pushed through the die the metal flows through the steel die. The die is placed at the other end of the container. Now, once the log passes it produces a section, this can be cut into shapes either in long length or short. The section is cuts according to the customized demands of the clients since the log is meant to be used for any particular industry. In certain extrusion process rectangular shaped billets. In this process only wide section sized extrusions are produced. This again depends according the demands of the supplier.

Aluminum extrusion is done for several kinds of industry and these aluminum extruded products are very commonly used in building industry. In this industry you can use aluminum in prefabricated houses/building structures, window and door frame systems, curtain walling, roofing and exterior cladding, and shop fronts. Besides, they also find place in the telecommunication and transport industry. In transport industry aluminum extruded products are found in rail vehicles, marine applications, airframes and for vehicles on the road.

So, what makes aluminum so popular? It is the versatility and the flexibility of the material that turns in so popular. Since aluminum is high temperature resistance and is corrosion resistant as well it is used to make utensils and is also used on transport vehicles. Besides, it is strong even though it is light weight and thus it is used in airframes.

So, if you are out there still deciding on selecting aluminum extruded products or some other metal you can give your votes to this metal as it is affordable and durable as well. No more second thoughts to this go ahead with aluminum extrusion and the products.

Aluminium Section in Latest

Aluminium Window Frames For Sale

Extrusion is the process to change the structure and shape of different metals. Some of the metals that are commonly extruded include aluminium, copper, lead, magnesium, zinc, titanium etc.

As aluminium is malleable in nature, it is easy to extrude. Specific dies are used for the aluminium extrusion process. These steel dies have opening of the desired shapes. Primarily, this process can be of two types - hot and cold. For hot process, precise heating is very important. It is done above the aluminium's recrystallization temperature. While, cold process is done at room temperature or near room temperature.

To obtain superior quality and improved surface finished aluminium extrusions, accurate temperate and its monitoring is vital. The finishing increases the durability, strength and its appearance. In the process, a billet is heated at the temperature of 400 C to 500 C and is pushed through the die under pressure to create preferred profiles. The shape, structure and specifications vary according to the requirements of the product, customers and its application.

The company's manufacturing aluminium extrusions prefer extrusion process over welding as it gives product with constant cross section. The strength and lightweight (strength-to-weight ratio) of this metal makes it popular among customers. Its several other properties gives it edge over other metals. These are cost-effective, corrosion-resistive, flexible and durable.

The prime source of aluminium is bauxite ore and Feldspar to some extent. Some of the fields where the this metal's extruded shapes are used include transportation, building and construction to name a few.

Scrap Aluminum Grades - How to Sort and Clean Scrap Aluminum to Maximize Its Value

Aluminum Extrusion Framing If you have a wonderful house with a great view of your garden or picture-postcard scenery spread gorgeously in front then you need doors that give an unimpeded view.
Consider the standard options like sliding doors. A part of the opening will always remain covered regardless of whether you use two partitions or three partitions. French doors simply do not suit large openings. The answer is custom bifold doors especially when the opening is large and an unrestricted view is desired. They save space and give an unhindered view of the exteriors.
The term bifold doors may be a misnomer since these doors are, in effect, made up of several panels that fold together like an accordion or concertina into a compact bunch of panels that do not take up much space and stay neatly on one side of the opening. You have a clear view. Standard panel sizes may range from 24 to 36 inches in width or customized to suit the width of the openings, which could be a better option in some cases. Custom bifold doors can help save space and the use of matching hardware means it will be a joy to operate.
Customization could take several forms. You can choose to have bifold doors with narrow or broader panels to suit design considerations and aesthetics of how the door will look when fully closed. Narrow panels do give a nice look but in some cases one may wish for a less obstructed view in which case broader panels serve the purpose. Cost will also vary. Obviously more panels lead to higher cost but the advantage is that opening and closing the bifolds will be easier when the door has narrow panels and they take up less space.
Where there are doors with glass the question of curtains or blinds always comes up. Here again customization helps when you choose double glazing panels with inbuilt blinds that are totally sealed within and can be opened or closed by sliding a magnetic latch. Such integrated bifold doors also help save space and present a neater appearance. Then there are small details that the installer and manufacturer will take care of such as using quality sliding tracks, pivots and hinges that integrate seamlessly into the aluminum frame. Another matter that necessitates customization is whether to place the track at the top or bottom. It is best to consult a reputed door supplier and installer and get a site inspection in order to get a customized fitting.
Bifold doors are not meant just as a partition between indoors and outdoors. They can also be used indoors to good effect as space savers between rooms. One can have a larger opening without the inconvenience of large door panels creating obstructions in confined spaces.
Bifold doors have several advantages such as ease of use, complete opening up of a room to the outside, security with the right set of hardware and energy efficiency. These advantages can be further enhanced by customizing the bifold panels along with glazing and hardware fittings. How To Make Aluminium Windows

 


Automatic Sliding Aluminum Doors or Aluminium Section ?

Aluminum Sliding doors are stackable doors of many panels that move entirely to one side stacked neatly together. Their earliest form can be seen in traditional Japanese architecture. Now they are a definite feature of most public spaces like malls, hospitals etc. They are manufactured with a sophisticated track and frame system with a superior sliding mechanism. They offer an energetic look to any property and helps to maximize the light in the room and achieving the full potential of the view. They are a feasible alternative to bi-folding doors, Aluminium Section  in Popular  with a sash width going up to 120 cms.

Aluminium Frame Company

What are the advantages of automatic aluminum sliding frame doors

· Disabled friendly – These automatic doors open and close on their own.

· Safety features – they have up to date safety features and wireless remote control as well. Timers allow security personnel to lock the doors without having to be present near them.

Modular Aluminium Frame

· Gives Footfall account – the number of times the door opens can be obtained. This is useful footfall information in malls or shops.

· Style and variety. These doors are available in aluminum, which can be painted to depict the company’s logo etc. in an office. The latest frameless glass doors are very popular among offices, where they allow an uninterrupted view of the proceedings outside.

Aluminum Window Frame Extrusions

· They allow for heat or coolness retention since they open only when somebody approaches the door

What are the parts of an automatic aluminum sliding door

An automatic sliding door normally consists of the following parts

· Operator

· Header

· Track

· Carrier wheels

· Sliding door panel(s)

· Sidelite panel(s)

· Jambs

· Lock and activation/ safety setup

The door panels are made from extruded aluminum profiles and safety glass for visibility.

Aluminum Window Frame Extrusions

Applications of automatic sliding aluminum doors

· Higher the traffic through the doors, heavier will be the moving panel.

Good for offices, hospitals, malls, banks, restaurants, art galleries etc.

· Fire and smoke door applications

· Energy conservation

· Security control, directional control or card access control applications

Aluminum Framing System

Testing procedures – The doors are made to open and close automatically for forty eight hours at a stretch.

How are they assembled?

· When they are shipped, the instructions for installation accompany them.

· The instructions are to be read fully

· Two or more people are required to install it

· Be careful when handling the glass

· Operate power tools carefully according to manufacturer’s instructions

Modular Aluminium Frame

What is weatherstripping?

Weatherstripping is sealing the sliding panels from the elements of the weather by an insulation strip. This has to be replaced when it gets worn out.

What are the things to watch out for in automatic sliding doors

· Installation is not easy – the tracks have to be perfectly aligned, and more than one person is required to install a sliding door.

· The track attracts dirt because it is a series of grooves in which dirt accumulates very fast

Aluminium Framed Doors

· The doors get jammed sometimes because of the rust and dirt of the metal parts. They have to be changed in this case. Regular oiling helps too.

· If there is a power cut, they will get jammed and they have to be forced open.

Interesting Facts About Aluminium Section in Recommended:

 About Aluminium Section in Recommended:

How To Make Aluminium Windows And Doors

Bifold doors are expensive but well worth the investment if you are considering renovations. Your house opens up to the garden and creates an amazing aesthetic when these doors are installed. It pays to exercise caution and care in a selection of the doors and consider various factors.


Price is not everything

The cheapest is not the best and the most expensive also is not necessarily the best. A Bifold door is not just panels put together; it is an entire system where design, engineering precision and choice of hardware plays an important in the door's looks and performance just as much as the bifold door installation does. Buying a well known international brand with local support is a good option.


Material of door

Bifolds can have wood, steel, uPVC or aluminum section frames. Wood can obstruct the view and be heavy. uPVC material can flex and distort which will affect the working of the door and there is a size limitation as well. Steel can be heavy. Aluminum is the best material for sections. It is relatively stable and does not tend to distort with temperature variations. From the maintenance point too aluminum scores because powder coated or natural anodized aluminum does not need frequent paint or maintenance.


Top hung or bottom rolling?

Bifold doors are available as top hung or bottom rolling types. If a strong enough beam is present then the top hung type is best because it does not collect leaves and debris and the frame conceals the mechanism from view.


Hardware and installation

Hardware is complex with bifold doors and must be precision engineered from quality materials besides being fitted just right during installation. Improper alignment can affect performance and cause stress on frames besides making the door hard to open and close. Quality systems have wheels that run on flat tracks and pivoted end doors for smooth movement even when the jamb does not allow much adjustment. Bifold door installation is important too when it comes to getting the threshold right to prevent rain seepage and yet creating a smooth transition that does not cause one to stub one's toes. Rain penetration is an important matter especially if the door is exposed. This is where the expertise of installer comes into play to provide a perfectly rebated rain-proof threshold. Security is another aspect to consider in the matter of bifold door hardware and a typical secure door would have multipoint locking system with shoot bolt for intermediate panels.


Single or double glazing


Energy conservation is important so double glazing is recommended. It will also provide some degree of acoustic insulation. Quality manufacturers provide U-values of 1.8w/sqmK or lower for such energy efficient bifold doors.


Screening

There are times when one may want an unimpeded view and there are times when one may want to shut out the light. Curtains are good but can impede the view. Venetian blinds that roll up all the way to the top may be ideal. If you choose a double glazed door then the blinds may be incorporated into the panels but at the cost of impeding the view. It is best to coordinate with the installer and clear this point as well before ordering a bifold door.

Aluminium Section in Recommended

Aluminium Profile If you have a wonderful house with a great view of your garden or picture-postcard scenery spread gorgeously in front then you need doors that give an unimpeded view.
Consider the standard options like sliding doors. A part of the opening will always remain covered regardless of whether you use two partitions or three partitions. French doors simply do not suit large openings. The answer is custom bifold doors especially when the opening is large and an unrestricted view is desired. They save space and give an unhindered view of the exteriors.
The term bifold doors may be a misnomer since these doors are, in effect, made up of several panels that fold together like an accordion or concertina into a compact bunch of panels that do not take up much space and stay neatly on one side of the opening. You have a clear view. Standard panel sizes may range from 24 to 36 inches in width or customized to suit the width of the openings, which could be a better option in some cases. Custom bifold doors can help save space and the use of matching hardware means it will be a joy to operate.
Customization could take several forms. You can choose to have bifold doors with narrow or broader panels to suit design considerations and aesthetics of how the door will look when fully closed. Narrow panels do give a nice look but in some cases one may wish for a less obstructed view in which case broader panels serve the purpose. Cost will also vary. Obviously more panels lead to higher cost but the advantage is that opening and closing the bifolds will be easier when the door has narrow panels and they take up less space.
Where there are doors with glass the question of curtains or blinds always comes up. Here again customization helps when you choose double glazing panels with inbuilt blinds that are totally sealed within and can be opened or closed by sliding a magnetic latch. Such integrated bifold doors also help save space and present a neater appearance. Then there are small details that the installer and manufacturer will take care of such as using quality sliding tracks, pivots and hinges that integrate seamlessly into the aluminum frame. Another matter that necessitates customization is whether to place the track at the top or bottom. It is best to consult a reputed door supplier and installer and get a site inspection in order to get a customized fitting.
Bifold doors are not meant just as a partition between indoors and outdoors. They can also be used indoors to good effect as space savers between rooms. One can have a larger opening without the inconvenience of large door panels creating obstructions in confined spaces.
Bifold doors have several advantages such as ease of use, complete opening up of a room to the outside, security with the right set of hardware and energy efficiency. These advantages can be further enhanced by customizing the bifold panels along with glazing and hardware fittings.

How to Choose Quality Aluminum Windows and Doors

Aluminum Door Frame Extrusions

When building or renovating, people often consider the windows and doors last. After all, don't they all look the same apart from the sizes? And this is ironic when they cover nearly half of the total surface of the house. Whether you choose wooden, iron, concrete or aluminium doors and windows, the right choice can boost the value of the house, provide ample natural lighting, enhance the design and give a feeling of space. Apart from the design, there's also the issue of workability. This pertains to where your windows or doors will be located, how they open, and whether you need enough ventilation or if the door or window just serves their primary purpose.

Comparing Aluminium Vs.Wood

There's a distinct edge in choosing aluminium folding doors over timber and that's less maintenance over their expected lifecycle. You won't have to worry about termites or carpenter bees boring holes in your wooden door or window frames. When you require double glazing, for example, aluminium is the right choice as it is more pliant to accepting the additional embellishment. Make sure, however, to choose the right installers since come companies cutting corners and fail to apply waterproofing techniques which ultimately result to nagging soggy and clammy issues on the frames, window sills and doors.

Choosing the Right Material

Aluminium is also identified as less secure compared to wood but this is not the case when choosing the right company that can install a sliding security door in your home. You only need superior quality aluminium. Be wary about doped aluminium or the lower-grade aluminium alloy. Aluminium is graded according to the purity of the material. Ask the installer if the product passes national standards on thickness and yield strength. This can also be your legal remedy when the installer cuts on corners and install the wrong product. Apart from the practical issues, you also want to ensure the quality of the finished product. Windows and doors are supposed to enhance the look of your house so you don't focus on the functionality alone.

Price Points

The industry is brimming with installers of aluminium windows or folding doors and this is good for the consumers in the sense that competition drives prices down. Remember, the right windows and doors will look light on your home, introduce elegance, offer durability (which means less cost on maintenance), perfect for contemporary-style homes, and gives the appearance of space.

How To Make Aluminium Windows And Doors

 


Automatic Sliding Aluminum Doors or Aluminium Section ?

Aluminum Sliding doors are stackable doors of many panels that move entirely to one side stacked neatly together. Their earliest form can be seen in traditional Japanese architecture. Now they are a definite feature of most public spaces like malls, hospitals etc. They are manufactured with a sophisticated track and frame system with a superior sliding mechanism. They offer an energetic look to any property and helps to maximize the light in the room and achieving the full potential of the view. They are a feasible alternative to bi-folding doors, Aluminium Section  in Most Popular  with a sash width going up to 120 cms.

Aluminium Framed Doors

What are the advantages of automatic aluminum sliding frame doors

· Disabled friendly – These automatic doors open and close on their own.

· Safety features – they have up to date safety features and wireless remote control as well. Timers allow security personnel to lock the doors without having to be present near them.

Aluminium Windows Cape Town

· Gives Footfall account – the number of times the door opens can be obtained. This is useful footfall information in malls or shops.

· Style and variety. These doors are available in aluminum, which can be painted to depict the company’s logo etc. in an office. The latest frameless glass doors are very popular among offices, where they allow an uninterrupted view of the proceedings outside.

Aluminium Frame Company

· They allow for heat or coolness retention since they open only when somebody approaches the door

What are the parts of an automatic aluminum sliding door

An automatic sliding door normally consists of the following parts

· Operator

· Header

· Track

· Carrier wheels

· Sliding door panel(s)

· Sidelite panel(s)

· Jambs

· Lock and activation/ safety setup

The door panels are made from extruded aluminum profiles and safety glass for visibility.

Aluminum Framing System

Applications of automatic sliding aluminum doors

· Higher the traffic through the doors, heavier will be the moving panel.

Good for offices, hospitals, malls, banks, restaurants, art galleries etc.

· Fire and smoke door applications

· Energy conservation

· Security control, directional control or card access control applications

Aluminium Window Frames For Sale

Testing procedures – The doors are made to open and close automatically for forty eight hours at a stretch.

How are they assembled?

· When they are shipped, the instructions for installation accompany them.

· The instructions are to be read fully

· Two or more people are required to install it

· Be careful when handling the glass

· Operate power tools carefully according to manufacturer’s instructions

Aluminum Extrusion Framing

What is weatherstripping?

Weatherstripping is sealing the sliding panels from the elements of the weather by an insulation strip. This has to be replaced when it gets worn out.

What are the things to watch out for in automatic sliding doors

· Installation is not easy – the tracks have to be perfectly aligned, and more than one person is required to install a sliding door.

· The track attracts dirt because it is a series of grooves in which dirt accumulates very fast

Aluminium Door And Window Frames

· The doors get jammed sometimes because of the rust and dirt of the metal parts. They have to be changed in this case. Regular oiling helps too.

· If there is a power cut, they will get jammed and they have to be forced open.

Interesting Facts About Aluminium Section in Reviews:

 About Aluminium Section in Reviews:

Aluminium Doors Cape Town

While aluminium is a very versatile material and aluminium doors can be suitably installed in a variety of indoor and outdoor contexts, two of the best places for the installation of aluminium doors are in industrial locations and as barriers between the inside and outside.

Aluminium doors are ideally suited to being installed as a barrier between indoor and outdoor environments because of their weatherproof and durable nature. This makes them a top choice for patio doors and café or bar doors leading to courtyards. Aluminium is one of best materials for patio door frames because the metal is a strong and very low-maintenance product. The advantages of installing aluminium framed doors as barriers between in and outdoors are largely due to the natural properties of the metal which make it resistant to corrosion as well as being impermeable and odourless. The aluminium framed doors do not rust and provide premium stability if installed correctly. Not only do doors of aluminium come in an extensive range of powder coated colours, they can also be carefully patterned for various aesthetic effects. Finally, aluminium framed doors are one of the best doors to be installed between interior and exterior because they won't warp or swell in damp conditions as wooden doors often do.

One of the second locations where doors of aluminium are best installed is in the heavy duty contexts of factories and warehouses where they are often the number one choice for a variety of applications. The popularity of aluminium doors in these environments is due again to the naturally strong, durable and low-maintenance nature of the metal. Aluminium is able to withstand any of the bumps and scrapes that are customary during the movement and transport of industrial machinery and products. Doors for industrial locations are made from large, high-strength metal panels that withstand the passage of oversize cargo and bulky machinery. Another reason why aluminium doors are such a top choice for heavy duty purposes is because the metal can be thermally treated to be scratch and dent resistant.

These are just too of the most popular locations for aluminium framed doors, but really, with such a versatile metal, the possible applications are endless. As well as providing a practical patio door and industrial door solution, glass and aluminium doors can be used inside the home in bathrooms and bedrooms as well as in the interiors or offices and other commercial constructions.

Aluminium Section in Reviews

Aluminum Door Frame Extrusions

Extrusion is the process to change the structure and shape of different metals. Some of the metals that are commonly extruded include aluminium, copper, lead, magnesium, zinc, titanium etc.

As aluminium is malleable in nature, it is easy to extrude. Specific dies are used for the aluminium extrusion process. These steel dies have opening of the desired shapes. Primarily, this process can be of two types - hot and cold. For hot process, precise heating is very important. It is done above the aluminium's recrystallization temperature. While, cold process is done at room temperature or near room temperature.

To obtain superior quality and improved surface finished aluminium extrusions, accurate temperate and its monitoring is vital. The finishing increases the durability, strength and its appearance. In the process, a billet is heated at the temperature of 400 C to 500 C and is pushed through the die under pressure to create preferred profiles. The shape, structure and specifications vary according to the requirements of the product, customers and its application.

The company's manufacturing aluminium extrusions prefer extrusion process over welding as it gives product with constant cross section. The strength and lightweight (strength-to-weight ratio) of this metal makes it popular among customers. Its several other properties gives it edge over other metals. These are cost-effective, corrosion-resistive, flexible and durable.

The prime source of aluminium is bauxite ore and Feldspar to some extent. Some of the fields where the this metal's extruded shapes are used include transportation, building and construction to name a few.

How Custom Bi-Fold Doors Can Help You Save Space

Aluminium Doors Cape Town

Extrusion is the process to change the structure and shape of different metals. Some of the metals that are commonly extruded include aluminium, copper, lead, magnesium, zinc, titanium etc.

As aluminium is malleable in nature, it is easy to extrude. Specific dies are used for the aluminium extrusion process. These steel dies have opening of the desired shapes. Primarily, this process can be of two types - hot and cold. For hot process, precise heating is very important. It is done above the aluminium's recrystallization temperature. While, cold process is done at room temperature or near room temperature.

To obtain superior quality and improved surface finished aluminium extrusions, accurate temperate and its monitoring is vital. The finishing increases the durability, strength and its appearance. In the process, a billet is heated at the temperature of 400 C to 500 C and is pushed through the die under pressure to create preferred profiles. The shape, structure and specifications vary according to the requirements of the product, customers and its application.

The company's manufacturing aluminium extrusions prefer extrusion process over welding as it gives product with constant cross section. The strength and lightweight (strength-to-weight ratio) of this metal makes it popular among customers. Its several other properties gives it edge over other metals. These are cost-effective, corrosion-resistive, flexible and durable.

The prime source of aluminium is bauxite ore and Feldspar to some extent. Some of the fields where the this metal's extruded shapes are used include transportation, building and construction to name a few.

Aluminum Extrusion Framing